 |
Smooth Clutch Casing :
This clutch cover was designed for a Suzuki Bandit 1200, and has no visible fixings on the outside face. This gives a very nice, neat and we think you'll agree,
rather lovely finish.
|
Click on the image for a larger version |
|
|
Bling is the New Black
You can now replace your boring old plastic brake reservoir pots with these 'Made to Order' ones. They are designed for replacing standard plastic parts and they come with a direct plug-in flange as standard, but we can also provide made to order screw-in fittings as
well. Simple and very effective. Call us for more details.
|
Click on the image for a larger version |
|
|
Glasgow Museums Furniture Conservation Department:
Recently we were approached by Glasgow Museums Conservation Department to help them replicate a missing drawer handle from a 19th century sideboard.
Following the Conservation Department guidelines we were asked to produce a handle which resembled the others as much as possible. This includes the century or so of oxidisation which had taken place on the original brass items.
After reviewing the item, much thought was put into how best to replicate it, with the Conservation Department being consulted at every stage of the project.
Eventually we came up with a unique casting and colouring solution which replicated the handle as close as possible, to the satisfaction of Glasgow Museums and their Furniture Conservator. This piece will be installed in the newly renovated Kelvingrove Museum next year.
 |
|
|
Click on an image for a larger version |
|
|
'Two Wheeled Attention Seekers' Custom Bike Project:
Motorbike enthusiasts are notoriously fussy about the parts they use on their bikes, and deservedly so, when you consider the stresses and strains placed on a motorbike and the risks involved if correct parts aren't used. So when one of the members of this local bike group approached us to make parts for his new custom project we were understandably pleased.
|
|
Click on an image for a larger version |
The project is still in progress and we'll keep you informed, but these pics of the yolk and risers for the front forks should give you an idea of the quality we put into the product.
|
|
Clutch Casing Modification:
This piece was done as a modification to the clutch casing for a 1200 suzuki bandit. Produced for a member of the Saints and Sinners bike club in Dundee.
|
|
Click on an image for a larger version |
|
